SpecWriter

Create your specification quickly and easily with SpecWriter. To start, select your supplier and follow the prompts to produce a summarised product specification. Click ‘Copy to clipboard’ and then directly paste into your specification.

The SpecWriter output is provided for guidance purposes only and is based on information provided by the supplier. BlueScope Steel Limited does not guarantee the accuracy of any results or appropriateness for your specific circumstances. Please contact the supplier for further information and refer to the Terms of Use for details.
  1. SupplierStramit
  2. Product CategoryPurlins & Framing
  3. ProductStramit TH120™ Top Hat Sections
  4. Cover WidthN/A
  5. MaterialZINCALUME® steel
  6. Material SpecificationAM125 / 0.70 BMT / G550
  7. ColourZINCALUME® steel

STEEL SELECT® Product Specification

Back
Stramit TH120™ Top Hat Sections
Name:
Stramit TH120™ Top Hat Sections
Supplier:
Stramit
Material:
ZINCALUME® steel
Thickness (BMT):
0.70 BMT
Colour/Finish:
ZINCALUME® steel

Purlins & Framing: Stramit TH120™ Top Hat Sections
Supplier: Stramit (stramit.com.au)
Size: N/A
Thickness: 0.70 BMT
Material: ZINCALUME® steel Conforming to AS/NZS 1365:1996 (R2016) and AS 1397:2021
Grade: G550
Metallic Coating: AM125
All purlins and girts shall be Stramit® C or Z Purlins and Girts used with Stramit® Bridging or approved equivalent, supported by submission of section properties, purlin capacity calculations, and a performance warranty, produced and detailed for this project.
Documents: Refer to Stramit Design Guides and Product Technical Manuals.
Installation: All sections should be installed in accordance with the manufacturer’s instructions with particular regard to bridging and bolt locations and lap sizes.
Where required for structural or installation purposes, Stramit® Bridging shall be installed using pre-made components to manufacturer’s instructions. All other purlin accessories shall be supplied by Stramit.
Warranties: Refer to Stramit and BlueScope (1800 800 789)
Warranties provided by BlueScope are subject to application and eligibility criteria. For full terms and conditions and to determine the eligibility of your building for a BlueScope warranty visit warranties.bluescopesteel.com.au

Create new specification

Specification copied!

Paste it into your formal documentation as required.

  • The colours/finishes shown represent actual product colours/finishes as accurately as possible. However, we recommend checking your chosen colour/finish against an actual sample of the product, as varying light conditions, screens and devices may affect colour tones and finishes.
  • We recommend contacting your preferred supplier to confirm colour/finish availability for your selected product and the most suitable material for your project.