Literature

Find the information you need in one convenient library. Browse design manuals, construction guides, specification resources, brochures, technical bulletins and colour charts from leading steel building product manufacturers.

The information contained in these files is used by you at your own risk. BlueScope Steel Limited does not warrant the accuracy or currency of these files and accepts no liability for the use of or reliance on these files.  Please refer to the website Terms of Use for full conditions.
Filter by Supplier
Filter by Product Category
Filter by Material
File TypeTitleSize
Metroll Architectural Collection (MAC Range) Product Range Brochure - WA

MAC - The Metroll Architectural Collection - is a range of contemporary roofing and walling products created specifically with leading edge design in mind.

1.7 MB
Metroll: Ausco Modular Brisbane - Met-TECH® Case Study

Case study outlining full roof replacement and partial renovation at the Ausco Modular Brisbane manufacturing site using: Metroll Trimclad®; Metroll Purlins & Girts.

666.8 KB
Metroll: Bunnings Warehouse - Keperra Met-TECH® Case Study

Case study outlining supply for The Bunnings Warehouse building (17,719sqm), and three other separate buildings. Products used: Metroll Trimclad® and Metroll Corodek®.

661.1 KB
Metroll: Carrara Sports & Leisure Centre - Met-TECH® Case Study

Case study for supply of materials to the Carrara Sports and Leisure Centre. The Safebridge® system was specified to ensure the stringent project requirements were satisfied.

631.7 KB
Metroll Ceiling Battens, Roof Battens & Top Hats Design Manual.

A Met-TECH Guide. Includes product range, standards, lap and connection details, section properties, limit state capacity tables, spans, fasteners and screw pull-out capacities.

451.1 KB
Metroll Cladding Compliance to Australian Standards

Roofing products manufactured and supplied by Metroll are made from 100% BlueScope® Steel and meet relevant Australian Standards and Building Code requirements - this document is a list of referenced standards for Metroll cladding profiles

64.3 KB
Metroll CORODEK® 0.60 for Curved Applications

A Met-TECH guide for Metroll CORODEK® 0.60 - includes design details; mass; curving styles; curving details; fasteners; support spacings and end laps; overhangs; lengths; care, handling and storage; cutting; material specification; material compatibility; adverse conditions; clean-up; availability and delivery.

317.7 KB
Metroll CORODEK® Design and Installation Guide

Metroll CORODEK® Met-Tech Guide includes product attributes, fasteners, side laps, spring curving, drainage & overflow, thermal expansion, foot traffic, overhangs, material specification, limit state capacity tables, span charts, care, storage and handling guidelines.

213.2 KB
Metroll Corodek® Residential Roofing - Cyclonic Limit State Span Tables

Cyclonic limit state span tables for Metroll Corodek® four use on residential projects within the requirements of AS 4055 or AS 1684

189.4 KB
Metroll Cyclonic Design for Roofing & Walling

A Met-TECH Guide - the Metroll Cyclonic Design Manual for roofing and walling provides all relevant information for builders, contractors and specifiers who wish to specify or use Metroll Corodek®, Trimclad® and Metrospan® in cyclonic areas.

546.5 KB
Metroll Designing for Wind Speeds - Guide to Wind Classification

A Met-TECH™ Guide - This Metroll guide provides information to assist in determining the wind speed classifications for domestic buildings.

403.6 KB
Metroll Fencing Range Brochure

A Met-TECH™ Guide for the Metroll Fencing range - includes benefits, profile styles, colour range, and panel heights and widths

549.2 KB
Metroll Fencing Selection & Installation Guide: Cyclonic

This guide provides the following information for Cyclonic fence installations: plan your fence; Region C fence selection; Region D fence selection (WA); equipment; components; installation types; post footings; preparing rails; installing your fence; extensions; gates; maintenance and warranty.

1002 KB
Metroll Fencing Selection & Installation Guide: Non-Cyclonic

A Met-TECH guide - this guide includes: choosing the right fence; equipment; components; installation types; post lengths & footings; fence installation; installing lattice & plinths; gates; maintenance and warranty.

750 KB
Metroll Flashings brochure

Metroll offers a comprehensive selection of flashings, barge ends, corner trims and foot moulds. All are manufactured to complement the appearance and functionality of Metroll gutters, claddings, roofing and building products. Metroll flashings come in a range of style, colours and sizes to suit commercial, residential, industrial and rural applications.

281.3 KB
Metroll Graptor Gutter Bracket

Metroll Graptor offers a compliant solution to mandatory gutter overflow requirements, using a plain-faced gutter profile.

219.6 KB
Metroll Graptor Installation Instructions

Installation instructions for the Metroll Graptor Claw and Graptor Base.

123.8 KB
Metroll HI-DECK 650® Brochure

Metroll HI-DECK 650® Met-Tech Guide - includes product attributes, specification details, fasteners, drainage & overflow, thermal expansion, foot traffic, limit state capacity tables and span charts.

293.4 KB
Metroll MAC Distinction Brochure - WA

Metroll MAC Distinction is a concealed fix architectural profile suitable for roofing and wall cladding. This brochure includes profile information, product data and the materials range.

565 KB
Metroll MAC Fencing Brochure

Metroll MAC Fencing range - three profiles that deliver on style and performance, Atlas, Polaris and Gemini. Available in WA only.

633.2 KB
Files selected for downloading